ACTIVE CLAD ALIGNEMENT FUSION SPLICER ILSINTECH SWIFT KF4

• Fiber alignment type: Active V-Groove Alignment
• Applicable type of fibers: 0.25mm, 0.9mm, 2.0mm, 3.0mm, Indoor cable
• Fiber count: Single fiber
• Applicable fiber dimensions: Cladding diameter: 125um / Coating diameter: 150um~3mm
• Fiber setting and cleaved length: 5mm to 16mm
• Splicing modes: Splice mode: 300, Heater mode:100
• Typical Splice Loss: SM: 0.02dB, MM: 0.01dB, DS: 0.04dB, NZDS: 0.04dB
• Return loss: > 60dB
• Splicing Time: Typical 7sec (Standard SM, SM-SM mode)
• Splice loss estimate: Available
• Sleeve heating time: Typical 13sec with IS-60 mode, IS-60 sleeve
• Applicable protection sleeve: 40mm,60mm and micro sleeves
• Storage of splice result:  Date : 5,000 Up to, Image: 5,000 Up to
• Tension test: 1.96N to 2.25N
• Operating condition: Altitude: 5,000m above sea level, Temperature: -10?~50?, Humidity: 0~95%,
  Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
• Storage condition: Temperature: -40?~80?, Humidity: 0~95%
• Dimension: 124(W)x189(L)x75(H)mm(Without rubber protector)
• Weight: 1.1kg(Including battery)
• Viewing method and display: Two CMOS cameras and 4,3-inch color LCD monitor
• Fiber view and magnification: X/Y : 130X MAX:260X
• Power supply: Li-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC Charger
• No.of splice cycles with battery: Typical 200 cycles
• Electrode life: More than 3,000 times
• Ext. Connector: USB

KIT CONTENT: Splicer with battery and charger, nylon soft case, high precission cleaver, manual stripper (3 holes), cleaning kit, calibration certificate.